Uniflex EPS
UNIFLEX EPS expanded polystyrene foam board is the generic industry name for the white rigid cellular plastic foam material derived from petroleum and natural gas by products.
UNIFLEX EPS is manufactured using beads of foam within a mould, heat and steam is then applied directly to the beads which causes them to expand and fuse together to form blocks or shape moulds. This process produces a closed cell structure, not a closed cell insulation board, due to voids that can occur between the beads.
UNIFLEX EPS is one of the lightest of all construction materials allowing ease of handling and faster construction times. Its outstanding thermal insulation properties and durability ensure performance throughout the full lifetime of the building and construction application in which it is used.
Download Catalogue
Uniflex FB
UNIFLEXFBTM BITUMINOUS FIBERBOARD is a compressible sheet manufactured from bitumen impregnated wood fibers to resist water absorption. It is a non-extruding, compressible joint filler to form and fill expansion and isolation joints for in-situ and pre-cast concrete construction. It is supplied in a range of standard thicknesses to suit most common applications.
UNIFLEXFBTM BITUMINOUS FIBERBOARD can also be used as a protection board to protect waterproofing systems against mechanical damage.
UNIFLEXFBTMBITUMINOUS FIBERBOARD characterized by high compressibility with minimal extrusion and excellent recovery. It is easy to handle, remains stable under temperature changes and severe environmental conditions, and the rough surface texture promotes good bonding with concrete.
Download Catalogue
Uniflex PE FR™
Our Fire Retardant Fillerboard is a high-performance joint filler designed to provide superior fire resistance and thermal insulation in construction applications. Specifically engineered to meet stringent safety standards, this product offers reliable protection and long-lasting durability for a wide range of structural joints.
UNIFLEX PE FR™ Fire Retardant Closed Cell Polyethylene Filler Board is a non-extruding, non-absorbent, UV resistant, semi-rigid, highly resilient, bitumen free, closed cell polyethylene board designed as a joint filler material for expansion and movement joints in concrete, brick work, block work and masonry.
UNIFLEX PE FR™ Fire Retardant Closed Cell Polyethylene Filler Board is bitumen free, rot proof and has high compression & recovery therefore accommodating thermal and other structural movements, without the risk of load transfer or reflective cracking through the designed joint. It also provides support and accurate depth measurement for subsequent joint sealant materials.
Download Catalogue
Uniflex PE™
UNIFLEX PE™ BACKER ROD is a non-extruding, non-absorbent, highly resilient, bitumen free, closed cell polyethylene backing rod designed as a backing material for cold-applied elastomeric joint sealants to create a watertight & airtight seal, to provides support and accurate depth measurement for subsequent joint sealant materials for expansion and movement joints in concrete, brick work, block work and masonry.
UNIFLEX PE™ BACKER ROD is bitumen free, rot proof and has high compression & recovery therefore accommodating thermal and other structural movements, without the risk of load transfer or reflective cracking through the designed joint.
UNIFLEX PE™ BACKER ROD is using in construction projects speeds up curing times and allows the building materials to flex, move and bend in response to environmental factors like heat, cold, wind, humidity or UV light.
Download Catalogue
Uniflex PE™
UNIFLEX PE™ BACKER ROD is a non-extruding, non-absorbent, highly resilient, bitumen free, closed cell polyethylene backing rod designed as a backing material for cold-applied elastomeric joint sealants to create a watertight & airtight seal, to provides support and accurate depth measurement for subsequent joint sealant materials for expansion and movement joints in concrete, brick work, block work and masonry.
UNIFLEX PE™ BACKER ROD is bitumen free, rot proof and has high compression & recovery therefore accommodating thermal and other structural movements, without the risk of load transfer or reflective cracking through the designed joint.
UNIFLEX PE™ BACKER ROD is using in construction projects speeds up curing times and allows the building materials to flex, move and bend in response to environmental factors like heat, cold, wind, humidity or UV light.
Download Catalogue
Uniflex PE™
UNIFLEX PE™ Bond Breaker Tape is a non-extruding, non-absorbent, highly resilient, bitumen free, closed cell polyethylene designed as a bond breaker tape for isolating and eliminating cold-applied elastomeric joint sealants adhesion to concrete, metals and joint filler boards.
UNIFLEX PE™ Bond Breaker Tape come with self-adhesive tape, which has comfortability hugely to irregular surfaces. It stops joint sealants from adhering to the surfaces and preventing “three-sided adhesion” which limits the
sealants ability to accommodate movement.
Download Catalogue
Uniflex PE™
Concrete expands and contracts according to temperature changes and therefore some type of filler is needed between slab work to keep the concrete from buckling when it expands and to fill the resultant gaps when the concrete contracts.
Expansion (movement) joints may be used between the slabs and also to separate the slabs from structures, thereby preventing damage that may occur during these expansion and contraction cycles.
UNIFLEX PE™ Closed Cell Polyethylene Filler Board is a non-extruding, non-absorbent, UV resistant, semi-rigid, highly resilient, bitumen free, closed cell polyethylene board designed as a joint filler material for expansion and movement joints in concrete, brick work, block work and masonry.
UNIFLEX PE™ Closed Cell Polyethylene Filler Board is bitumen free, rot proof and has high compression & recovery therefore accommodating thermal and other structural movements, without the risk of load transfer or reflective cracking through the designed joint. It also provides support and accurate depth measurement for subsequent joint sealant materials.
Download Catalogue
Uniflex PE™
UNIFLEX PE SLIP MEMBRANE is a pre-formed polyethylene strip designed for use in sliding joints in reinforced concrete structures where load bearing characteristics are present, and low friction resistance is required.
UNIFLEX PE SLIP MEMBRANE can be used under in-situ or precast concrete slabs and beams, structural steelwork bearing plates and pipe supports to form a thin sliding joint. It is resistant to most chemicals, solvents and weathering.
Two layers of UNIFLEX PE SLIP MEMBRANE can also be used for sliding wall joints, pre-stressed, post-tensioned circular concrete tanks or similar structures provided the safe load bearing capacity is not exceeded.
Download Catalogue
Uniflex RBCF
UNIFLEX RBCF is a resin bonded cork expansion joint fillers, it is manufactured from granulated cork bound together with a synthetic resin and highly suitable as a filler board support for joint sealants for use in movement joints.
UNIFLEX RBCF does not contain bitumen or tar and cannot impair the adhesion of any joint sealing compound by contaminating the joint faces. When subjected to wet or moist conditions, it is capable of swelling to occupy a larger volume than that of the material as supplied.
UNIFLEX RBCF is suitable for use in all types of concrete construction. It is particularly recommended for use in water retaining structures where it is essential that joints remain tightly packed even if they increase in width.
Download Catalogue
Uniproof DPM
UNIPROOF DPM (DAMP PROOF MEMBRANE) is a recycled material produced from petroleum based products. It is often used in the construction industry as moisture-proof membrane to cover vital building materials and equipment at construction sites.
UNIPROOF DPM (DAMP PROOF MEMBRANE) provides an excellent vapor barrier for the protection of concrete slabs and foundations, it prevents moisture from penetrating to the concrete slab which in turn reduce the growth of fungus, mold and may even stop termite invasion.
It also can be placed above curing concrete in order to retain the moisture within the concrete to reduce cracking on the concrete surface. This product is recyclable plastic material and therefore it is environmental and ecological friendly material.
Download Catalogue
Uniproof DPM HD
UNIPROOF DPM (DAMP PROOF MEMBRANE) is a recycled material produced from petroleum based products. It is often used in the construction industry as moisture-proof membrane to cover vital building materials and equipment at construction sites.
UNIPROOF DPM (DAMP PROOF MEMBRANE) provides an excellent vapor barrier for the protection of concrete slabs and foundations, it prevents moisture from penetrating to the concrete slab which in turn reduce the growth of fungus, mold and may even stop termite invasion.
It also can be placed above curing concrete in order to retain the moisture within the concrete to reduce cracking on the concrete surface. This product is recyclable plastic material and therefore it is environmental and ecological friendly material.
Download Catalogue
Uniproof DPM VG
UNIPROOF DPM (DAMP PROOF MEMBRANE) is a recycled material produced from petroleum based products. It is often used in the construction industry as moisture-proof membrane to cover vital building materials and equipment at construction sites.
UNIPROOF DPM (DAMP PROOF MEMBRANE) provides an excellent vapor barrier for the protection of concrete slabs and foundations, it prevents moisture from penetrating to the concrete slab which in turn reduce the growth of fungus, mold and may even stop termite invasion.
It also can be placed above curing concrete in order to retain the moisture within the concrete to reduce cracking on the concrete surface. This product is recyclable plastic material and therefore it is environmental and ecological friendly material.
Download Catalogue